Tag Archives: felt flowers

DIY Daisy Chain Crown

24 Jun

The sweet simplicity of a daisy chain crown will forever be a symbol of warm summer days. This DIY felt daisy crown will last forever and have you dreaming of summer picnics all year round.

A word about felt:

Wool or wool blend felt works well for little petals like those in this felt flower tutorial. Bamboo and most acrylics aren’t going to hold the smaller shapes as well and may fuzz out along the ends.

It’s important to use a pair of scissors that are small but sharp enough to handle tight edges and curved petals. I highly recommend holding your felt daisy pattern in place with packing tape, you can re-use your template again and again this way. The daisy centers can be freehand cut and varying the length will make your daisy larger or smaller.

You will need:

Floral Wire about 16 wires – 12 for flowers and the rest for crown base.

Wire cutters

Floral Tape

9″ x 12″ sheet of high quality felt for flowers, I used white

9″ x 6″ golden yellow felt for felt flower centers, I used Egg Yolk

8″ x 6″ Green felt for leaves and end caps, I used Fresh Cut Grass

Hot glue gun and glue

Free pattern to make felt daisies.

Optional: Packing tape or clear tape for cutting

Cut:

12 flower shapes from white felt

12 centers from yellow felt

Leaf and cap from green felt

Making felt daisies – the easy way

For loose felt daisies, carefully cut out daisies from white felt using clear tape on top to help hold your template as you cut.

To create a daisy on a stem place the floral wire at the end of the strip, add glue and roll gluing as you go. Wrap the felt flower around the center and glue at the base.

Cut a small slit into the center of the end cap and slits along the sides as marked so it curls around the base easily. Slide cap up the stem and glue down the sections trimming if needed so the green doesn’t extend past the flowers base. Keep the leaves fairly high because you will need to cut the wires to create your daisy chain crown.

To add a leaf, place glue along the center and part way up the leaf and fold onto the floral wire. Trim off any extra leaf felt along the ends and side. You can also glue these on after you create your crown.

Measure out your head or the head of the person you plan to crown. The crown needs to sit on the midway on the forehead, mine measured 7.5″.

Starting with two floral wires 2/3rds of the way down your first wire twist a second floral wire. Add more wires by twisting until your crown is the desired size for me this was 4 wires.

Twist daisies around your base using as much of the wire stems as possible to create a solid crown. Cut the extra wire once it is securely attached. Repeat until you’ve created a full crown of glorious daises.

Happy Crafting

~Andie

Summer Daisies – Felt Flower Daisy Tutorial

10 Jun

These sweet summer daisies can be used to add a natural feel to an endless number of summer crafts. Of all the DIY felt flowers, daisies are some of the easiest. Learning how to make felt daisies is simple if you take your time and invest in quality felt and a good set of scissors.

Wool or wool blend felt works well for little petals like those in this felt flower tutorial. Bamboo and most acrylics aren’t going to hold the smaller shapes as well and may fuzz out along the ends. The key to this felt flower is a clean cut. It’s important to use a pair of scissors that are small but sharp enough to handle tight edges and curved petals. I highly recommend holding your felt daisy pattern in place with packing tape, you can re-use your template again and again this way. The daisy centers can be freehand cut and varying the length will make your daisy larger or smaller.

Created with hot glue, these felt flowers are no sew. The addition of floral wire allows the daisies to be used in wreaths or tossed into a vase or bouquet. What will you use these easy little felt flowers for? We’d love for you to share your creations with us on our facebook page.

You will need:

For 12 flowers

9″ x 12″ sheet of high quality felt for flowers, I used white

9″ x 6″ golden yellow felt for felt flower centers, I used Egg Yolk

8″ x 6″ Green felt for leaves and end caps, I used Fresh Cut Grass

Hot glue gun and glue

Free pattern to make felt daisies.

Optional: Floral wires for stems, packing tape or clear tape for cutting

Dirty Glue Gun for Crafting Cred.

Cut:

1 flower shape from white felt

1 center from yellow felt

Leaf and cap from green felt

Making felt daisies – the easy way

For loose felt daisies, carefully cut out daisies from white felt using clear tape on top to help hold your template as you cut.

Place a small drop of glue on the end of the center strip and slowly roll upwards, gluing occasionally.

Once the center is rolled add glue to the side and wrap your daisy around the center gluing as you go. Glue cap on as shown below.

To create a daisy on a stem place the floral wire at the end of the strip, add glue and roll as before. Add the felt flower with glue as show above.

Cut a small slit into the center of the end cap and slits along the sides as marked so it curls around the base easily. Slide cap up the stem and glue down the sections trimming if needed so the green doesn’t extend past the flowers base.

To add a leaf, place glue along the center and part way up the leaf and fold onto the floral wire. Trim off any extra along the ends and side.

Happy Crafting

~Andie

Rainbow Felt Roses Tutorial

9 Jan

rainbowrosesThere is no quicker way to brighten up a space than with a bouquet of felt rainbow roses. These beauties make a great DIY felt floral arrangement or even a stunning felt bridal bouquet for a color loving bride. Bring some rainbows into your space with this free, no sew rainbow rose pattern and tutorial. image1

You can also use one color felt or even shades of monochrome colors to create felt roses.

youwillneed

You will need:

Wrapped floral wire cut into 12″ and 6″ lengths

Felt in rainbow colors I used Lavender, Pink Tutu, Flamingo, Egg Yolk, Chartreuse, Ice, Aqua, Mint and Sunshine.

The amount you will need will vary but a 9″ x 12″ sheet of each should make you around 5 flowers.

Green felt for rose base and leave I used Fresh Cut Grass

A 9″ x 0.5″ scrap of felt the color doesn’t matter as it will be entirely covered

Hot glue gun and glue

Pattern to make felt rainbow roses (PDF pattern for felt roses)

Cut

1 strip from any color felt

Petals as marked on pattern from various felt colors

1 base and 1 of each leaf from green felt

styles.png

You have lots of options for rainbow rose petal layout you can place the matching petal colors together, lay them adjacently so they slightly meet along the rose or my favorite look which was to lay the felt rose petals randomly. The more petals you choose to use the fuller your rose will be so feel free to keep adding until you are happy with the look of your felt roses.

r5

Wrap Strip around wire gluing as you go. Set aside

r7

Take the half circle piece and glue to create a cone.

r9

Glue cone to the wrapped wire. Set aside.

r10

Lay the inner petals down and run glue along one of the rounded sides.  Add all the inner petals.

warp

Roll inner felt petals together and hot glue along the open sides.

r16

Glue to cone on the wire. And lay a 1″ length of hot glue along the side.

r17

Add the 4 middle petals to the base overlapping slightly.

r18

Fill the gap at the base with a bit of hot glue and press inward and pinch together.

r20

ilt.png

r22Place a line of hot glue along two of the middle petals.

r23Begin placing the outer petals centered so they don’t overlap and the petals flare out more. Repeat until you are happy with the look of your rainbow felt roses.

r24Lay hot glue around the inner gaps a the base of the rose and pinch together just as you did in a prior step. Press until glue sets.

r26

Cut a line to the center of the rose base so you can slip it over the wire and place hot glue over the whole shape, carefully slip onto the base of the felt rainbow rose with glue side down. Press pieces together.

r29

To make felt rose leaves.

Lay glue down the center of the leaf and press one side of the 6″ wire to the leaf, pinch at the base.

roseleaves

Repeat with second leaf and side. Twist the felt leaves around the rose and add a bead of hot glue to hold firmly.  Adjust leaves as desired.

rainr1

feltrosepattern

rainbow2

Happy Crafting

~Andie

You might also enjoy:

gummybearsfelt2

starsprheadfelt brides bouquet hydrangea patternfelt flower pin

%d bloggers like this: