Tag Archives: pincushion

Beehive Pincushion and Honeybee Pins

11 May

Bee Pincushion DIY free pattern

I just love pincushions, they are whimsical yet functional objects that really reflect the users personalities. This beehive pincushion makes a lovely gift for the queen bee in your life. Dress it up with flowers or keep it simple and regal.  The bee pins are a functional but fun addition that will allow you to keep a little spring with you all year long.

You will need;

Beehive Pincushion

1- 9 x 12 sheet yellow felt I used Banana Cream Pie and matching thread.

Scrap of brown felt I used Saddle Brown

 Stuffing

Doll Needle or long sewing needle.

Optional

Felt flower shaped cutouts;

Star Shaped Flowers

Cypress Flower Shape

Flat black sequins (for flower center)

Baby’s breath sequins

Felt Glue

Bee Pins

Long sewing pins- size matters here the longer the better

Craft Glue suitble for plastics and metals – I used a product diffrent product for this project but I found “Amazing Goop” worked better than the Gorilla glue.

Shrink Film (printable inkjet is best)  If you can’t find it or don’t want to print you will also need a black fine tipped pen. Laser printers work with heat and cannot be used for this project.

Yellow markers or colored pencils to color bees

Felt Beehive and printable bee templates (at the end of post)

IMG_2801

Beehive Pincushion

Cut banana cream pie felt into 6 strips of 1.5″ wide felt in 8″,7″,6″,5″,4″ and 3″ long. Cut Bottom and top from banana cream felt and set aside. Cut hive opening from brown felt.

IMG_2768

Place long sides tether and overcast stitch up the side. Start this stitch about 1/4″ in leaving a gap  on one end as shown. It is easiest to stuff this as you go but using a chopstick or pencil will help you stuff it afterwards if desired.

hive1

Gather the end of the non gap side. Gather and sew through to make it easy to tuck.

hive2

Tuck gathered end into end gap, you will want to bend and work the stuffing into the right place to help it hold the circle. Sew through to hold (don’t worry we are covering this area with flowers.

hive3.jpg

Repeat with all beehive pieces.

hive4.jpg

Stack up the hive pieces from largest to smallest lining up the seams.  Run the threaded doll needle through.

hive5.jpg

Working your way around sew them together.

Beehive pincushion

Once all the pieces are together sew desired flowers into place.  Accent with the baby’s breath sequins. Using felt glue add the hive opening. You can also sew this into place.

IMG_2793

Add top with an overcast stitch.

rounds

IMG_2794

Stuff or add a cloth bag of ground nut shells if you prefer.

IMG_2796

Sew bottom onto pincushion with an overcast stitch.

 Bee Pins

hiving

bees1

Print bees onto printable shrink paper. Color centers yellow. Cut out bee shapes and shrink according to manufacturer directions. If you aren’t using printable shrink paper trace the bees with the fine tipped marker and proceed.

bees2

Glue bees onto pins facing various directions using craft glue.

I found the easiest way to do this is to put a pea sized dollop of goop onto a piece of paper and dip the end of the pin in and then lay onto the backside of the shape.

Let dry as directed and enjoy!

IMG_2802

Beehive template PDF Download – Beehive Pinkeep

 

beekeepertemplate

Happy Crafting! ~Andie

Beehive pincushion

Can’t get enough felt pincushions, same.

Check out these free felt pincushion tutorials.

vdd

DIY felt sea urchin pincushion

pcover2

prhead

Felt Voodoo Doll Pincushion

23 Oct

IMG_7065

This creepy cute voodoo doll pincushion is a simple and spooky addition to your sewing basket. Able to hold all the pins you can possibly imagine yet always there with a goofy grin, he’s the ultimate frienemy! I wanted to give mine a bit of a vintage aged feel so I went with a wool blend chai felt, a milky grey beige tone but you can make this felt pincushion in any color of the rainbow. The same applies to buttons, any size or shape will do. This project is truly great for allowing you to use whatever you have on hand and is an easy project for even beginning sewers.

felt voodoo doll

You will need:

9″ x 12″ sheet felt I used Chai 

Scrap of felt for heart I used Pomegranate

Buttons one larger than the other, any size or style will work

Black embroidery thread

Stuffing

 

Cut

Two voodoo doll bodies from chai felt and one heart shape from scrap

felt voodoo dollSew buttons onto front of one voodoo body side.

DIY Voodoo doll

Using one full strand of embroidery thread stitch mouth shape and stitch over as shown.

Stitch down heart in an X shape.

DIY voodoo doll pincushion

Place the two pieces together so that they match up.

cute felt dollUsing one full strand of embroidery thread overcast stitch around the outside, stuffing as you go. Ugly felt voodoo dollEnjoy your new friend…or enemy!

vdd.jpgHappy Crafting!

~Andie

 

voodoodoll

Pop by the shop:

American Felt and Craft

You may also like: 

Zombie MouseZombie mouse felt cat toy, free felt pattern and tutorial

Glowing Ghost felt finger puppetsGlowing felt finger puppets put a fun new spin on ghost stories

Felt Bean Bags for halloweenDIY Halloween Bean bags

Llama Pincushion

16 Jun

pcover5

Thanks to motherhood I can recite nearly every word to “Is Your Mama A Llama” which admittedly, is less impressive than the works of collected works of Keats but Keats doesn’t rhyme and is unlikely to inspire adorable pincushions.

pcover2

For this project you will need:

Embroidery thread in various colors, I chose a punch color, a mustard color, a sunny yellow, aqua and a blue.

Cardboard

Felt in teal, linen, orchid, sunshine and matching threads

Sequins in Mermaid and Hot Pink

Stuffing

DIY Llama Pincushion Patterns (at the end of post)

Optional: Pins, Mini Pom Poms and Hot Glue

p

These tiny tassels are super easy to DIY and so super cute.

I made these in a different color for each step in the interest of clarity but then I fell in love with the look and ended up using the multicolored versions on the pincushion.

P1

  1. Cut out rectangle the cardboard shape and lay a 4″ length of string down (the blue thread)
  2.  Wrap cross stitch thread around in the opposite way 10x (the punch colored thread
  3. Slide the 4″ piece (blue) to the top and knot
  4. Slide the looped threads (punch colored) off the cardboard
  5. Pinch the top (where the knot is) and loop a second 6″ piece (mustard color) around 5x and knot tightly. Clip the ends.
  6. Fit scissors into the looped area and cut to create tassel ends.

For this project knot the top threads (blue cords in the picture) 3 more times to give it something to hang from when we stitch it to the pincushion. Clip off extra thread.

ptassle

For the Llama Pincushion

Cut 1 side and two tops from off white (Linen) felt.

Cut 3 cross shapes and blanket shape from pink tone (Orchid) felt

Cut 12 petal shapes from yellow felt

Cut 1 llama shape from Teal felt.

p2Stitch design down as shown using a running stitch and matching threads. Attach sequins to the centers.

For tips on attaching sequins read Attaching Sequins.

p3Stitch Llama shape to the center of one of the round pieces using a running stitch and matching thread.  For help cutting complex shapes see this post.

p4Stitch  blanket shape to llama with matching thread and accent with french knots in various colors. p5Attach top to sides using an overcast stitch and matching thread. Stitch down where short ends overlap with a running stitch.p6

Stuff  so the top piece is slightly rounded and begin attaching second round felt piece. Before sewing closed slip in smaller round cardboard piece to help the pincushion sit flat and allow the top to bulge out.

Sew tassels along the top in the spaces between designs with a stitch into the knotted tops.

pcover4

To make pom pom pins you simply hot glue tiny pom poms to pins I am not sure how usable they are but they are so cute I think they still deserve a place on your DIY pincushion.

puffs

pcover1

Llama pincushion craft pattern- Print at full size.

llamapattern

Now go forth and craft!

~Andie

Felt Sea Urchin Pincushions and Sea Life Pins

13 Jul


DIY felt sea urchin pincushion If you’re going to sew your probably going to need a pin or two and a place to put all of them. These little felt sea urchins certainly fit the bill!

But one word of warning if you start making these you may forget all about sewing until you have covered most of the surfaces in your home with sea urchin pin cushions and hundreds nay thousands of fish, octopi, and seahorses.

Summer sewing never looked so cute!

You will need

1- 9 x 12 sheet felt for urchin in any color you dang well please

(I used, Orchid, Peaches and Cream, Key Lime Pie and Peacock)

Flower shaped buttons (Optional)

Marching thread / Stuffing

Ball Pins to create urchin dots

Long sewing pins- size matters here the longer the better

Craft Glue – I used a product called Amazing Goop

Shrink Film (and low grit sandpaper if needed)

Markers or colored pencils to color fish

Templates (at the end of post)

Pin Cushion

Cut the circles from felt sheet, these guys go together pretty quickly, here’s the rundown.

Easy Sea Urchin Pincushion

1.  Sew around the outer edges with a basting (aka big ole sloppy running) stitch

2.Pull to create a bit of a cup and fill with stuffing.

3.Place smaller circle over the base and overcast stitch into place.

4. Turn over 5. Add flower buttons if desired.

DIY Felt craft - sea urchin pincushion tutorial

Add ball pins to urchin in a star pattern.

Now for the big finish or fishish (sorry I couldn’t resist)

Sea Life Pins

Begin by prepping the shrink film, some shrink films are ready to go and need no prep otherwise you will need to prep it with a low grit sandpaper.

how to prep shrink plastic

 Trace sea templates onto shrink film and color with permanent markers.draw and color sea  shapes onto shrink film

Cut out shapes small scissors work best for this. Try to cut away as much of the clear edges as possible.

shink dink fish shapes

Cut out the shapes and heat to shrink as directed. Shrink film shrinks differently depending on brand so your results may vary.

Create Custom Sewing Pins with Shrink Film

Glue fish onto pins with craft glue, I used a product called Amazing Goop – because how can you not use a product called amazing goop!

I found the easiest way to do this is to put a pea sized dollop of goop onto a piece of paper and dip the end of the pin in and then lay onto the backside of the shape.

Let dry as directed and enjoy!

Sea Urchin Pincushions and Sea Life Pins American Felt and Craft The Blog

Templates for sea urchin pincushion and sea life pins- American Felt and Craft

Happy Crafting! ~Andie

Sea Urchin Pin Cushions

Need more felty ocean fun? And come on who doesn’t?

DIY Seahorse hobby horse

DIY Seahorse hobby horse

Crinkle Starfish tutorial

Crinkle star fish toys

Felt Bookmark tutorial - Sea Coral

Branching coral bookmark

American Felt and Craft - a unique online craft supply store.

%d bloggers like this: